|
|
800 Rides
|
1967 Taz Van
The Taz Van is a 1967 G10. I bought it in Colorado in 1983 and drove it back to Illinois. It had a 289 with a C4 Trans. I put a 400 small block with a turbo 400 Trans the winter of 1983 -84. I ran that drive train with a few minor repairs "2 tranny's 5 rear ends, & a couple of carbs". This is the 4th paint job. The Current Paint job was done by Craig Weidner from Fond du Lac, WI. In the winter of 2006 - 2007 I installed the current 406 SB.

|
 |
|
Small Dune Buggy
Single seater, with an 8hp briggs soon to be a honda cbr 600. about 100hp. weights 682lbs, measures 4' by 8' with 25x12-9 rear tires and 21x7-10 fronts

|
 |
|
1995 Mustang GT conv't
Last year for the 5.0! Convertible top is in perfect shape! Factory Ford original paint, never crashed! Factory options: 5 speed manual, red exterior with black top, tan leather interior, speed control, a/c, anti-lock brakes, 4-way power drivers seat, remote keyless entry, cargo tie-down net, illuminated entry, front floor mats, optional traction-lok axle, rear window defrost, prem am/fm stereo/cd radio. I have the original window sticker. Upgrades done in the last 5,XXX miles: New 17X9 front and 17X10.5 rear Bullit wheels. New 275/40 front and 315/35 rear Sumitomo HTR tires.

|
 |
|
ALL TERRAIN WHEELCHAIR
THIS IS A SIX WHEEL DRIVE ALL TERRAIN WHEELCHAIR. WE USED LINEAR ACTUATORS TO MOVE THE SEAT FORWARD, FOR EASIER TRANSFER FROM A REGULAR WHEELCHAIR TO THE OUTBOUNDER. THIS MACHINE CAN TAKE YOU WERE EVER YOU WANT TO GO AND BACK. IT'S BATTERY POWERED SO SHES REAL QUITE TOO!

|
 |
|
Pressure Washing & Carpet Cleaning Upstate New York
I own a Commercial Pressure Washing Business along with a Carpet Cleaning Business in Upstate New York and purchase my supplies and repair equipment from Northern. I have always had great luck dealing with Northern.
I have a Hot Water 4000psi pressure washing unit in the trailer and it is totally self contained. The trailer has a 500 gallon water tank, generator, seperate water pumps, lights, cabintes, work bench and other items to make the job easier. When I pull up to the job site the only thing that comes out of the trailer is the wand and hoses.

|
 |
|
OLE WOODY
Just dont park it near any woodpeckers..lol

|
 |
|
1970 Chevelle Malibu
This is my 1st car its a 1970 Chevelle Malibu. I bought it
May 5th 1979 in less then 3 months I will own it 30 years.
Its Candy Apple Red with a custom interior 350ci 375 hp
12 bolt possy 4:11. I did an off frame resto. from 8-2004
to 7-2007 I feel like 17 again I love driving it to car shows
in my area. Yesterday 2-22-09 I won an award for
Outstanding Engine at Motorama in Harrisburg PA.

|
 |
|
Having your cake; and eating it, too!
These are my rides. On the left, we have my 1938 Plymouth P-5 Tudor Sedan, which is powered by a 360 cu.in. MoPar® Crate engine, sporting Holley Pro-Jexion®, built onto a modified Edelbrock intake manifold, and a Torqflite 727 transmission. It runs in the high 12s at 110 mph. On the right we see my 2005 Dodge Ram 1500 SRT-10 with its ceramic headers, modified chip, six-speed Tremec® transmission, 15 in diameter Brembo® brakes; all pulling power from and whoaing the 505 cu.in v-10 Viper engine. In a nutshell, just like the guys at Northern Tool; I get to have my cake and eat it, too!

|
 |
Northern Tool + Equipment is not liable for any misuse or abuse of the product set forth in the photographs. All submitters are responsible for reading operation manuals and wearing proper attire before using equipment.
|